cmcs(1)

NAME
cmcs - cmcs -ip <ip-address> -pw <password> [ optional switches ]

SYNOPSIS
cmcs [-ip ipAddressString] [-pw loginPassword] [-timeout timeout] [-setpassword newPassword] [-help] [-reboot] [-list] [-save saveConfig] [-load loadConfig] [-shdev] [-xmlstatus] [-setip newIPAddressString] [-shlan] [-gway gatewayString] [-usa unicastAddr] [-usp unicastPort] [-bsp broadcastPort] [-igmp igmp] [-sym symbolRate] [-rfreq rfrequency] [-shsat] [-shtun] [-shtraf] [-lnbpwr powerChoice] [-lnbv voltageRangeChoice] [-lnbpol polarization] [-lnblc enableLongLine] [-lnbt lnbTone] [-lnbtf lnbToneFrequency] [-shlnb] [-recm receiverMode] [-add newpid] [-del delpid] [-shpid] [-mpid addmappid] [-umpid delmappid] [-shmap] [-addvid addvidwiz] [-delvid delvidwiz] [-shvid] [-fwdall forwardAll] [-addpat addpat] [-delpat delpat] [-shpat] [-addcam addCAM] [-delcam delCAM] [-shcam] [-camwatchdog camwatchdog] [-addvprog addvprogram] [-delvprog delvprogram] [-adddprog adddprogram] [-deldprog deldprogram] [-shvprog] [-shguide] [-goldcode goldcode] [-isi isi] [-setisi setisi] [-modcod modcod] [-updatefirmware updatefirmware] [-csv1status csv1status] [-csv2status csv2status]

OPTIONS

-ip IP Address of receiver to communicate with,
    1 String value

-pw Configuration password of Novra receiver,
    1 String value

-timeout
    Number of milliseconds to wait for login response from Novra receiver,
    1 Int value between 1 and 60000.
    Default: `1000'

-setpassword
    Change the login password for the S75 to a new value,
    1 String value

-help
    Display help on available switches.

-reboot
    Tell the receiver to reboot.

-list
    Display list of receivers on the local subnet..

-save
    Save current receiver configuration to the given file name.,
    1 String value

-load
    Load receiver configuration from the given file name.,
    1 String value

-shdev
    Displays information about the receiver..

-xmlstatus
    Displays receiver status in XML stream..

-setip
    Set receiver's IP address and netmask t eg. -setip 192.168.0.1 255.255.255.0 ,
    2 String values

-shlan
    Display current network settings including default gateway.

-gway
    Set the default route (gateway) of receiver,
    1 String value

-usa
    Set destination address for unicast status packets,
    1 String value

-usp
    Set destination port for unicast status packets,
    1 Int value.

-bsp
    Set destination port for broadcast status packets,
    1 Int value.

-igmp
    Control IGMP mode of operation on LAN interface by specifying 'on' or 'off',
    1 String value

-sym
    Set symbol rate in mega symbols per second (MSPS),
    1 Float value.

-rfreq
    Sets the receive frequency in megahertz (MHz),
    1 Float value.

-shsat
    Display satellite interface settings and signal quality.

-shtun
    Display satellite interface settings and signal quality.

-shtraf
    Display traffic statistics for the satellite and Ethernet interfaces..

-lnbpwr
    Controls whether receiver provides power to LNB by specifying 'on' or 'off'.,
    1 String value

-lnbv
    Used to specify voltage range used to control LNB by specifying '11-15v' or '13-18v'.,
    1 String value

-lnbpol
    Select polarization of LNB as 'horizontal', 'left', 'vertical' or 'right'.,
    1 String value

-lnblc
    Configure receiver to enable long line compensation mode by specifying 'on' or 'off'.,
    1 String value

-lnbt
    Turns on or off the receiver's LNB control tone by specifying 'on' or 'off'.,
    1 String value

-lnbtf
    Sets the frequency of the LNB control tone by specifying '22KHz' or '44KHz'.,
    1 String value

-shlnb
    Display LNB settings and status.

-recm
    Sets operating mode of receiver as either 'DVB-S' or 'DVB-S2'.,
    1 String value

-add
    Specifies DVB packet identifiers containing MPE data to be processed by the receiver.,
    1...16 Int values between 0 and 8191.

-del
    Deletes packet identifiers containing MPE data from list processed by the receiver.,
    1...16 Int values between 0 and 8191.

-shpid
    Display list of packet identifiers to be processed by the receiver.

-mpid
    Maps packets with given identifier to the provided IP address and port.,
    3...64 String values

-umpid
    Deletes the mapping identified by the specified PID, IP address and port.,
    3...64 String values

-shmap
    Shows mapped destinations with their PIDs..

-addvid
    Configure forwarding components of a video stream to an IP/port destination.,
    8...9 String values

-delvid
    Delete configuration forwarding video stream components to an IP/port destination.,
    3 String values

-shvid
    Displays list of video programs being forwarded..

-fwdall
    Sets the Forward All flag to 'On' or 'Off', destination specified by IP Address and port and a 'fwdnulls' option to forward NULL PIDs.,
    1...4 String values

-addpat
    Adds a program association table entry for the provided program number and PID.,
    2 Int values.

-delpat
    Deletes the PAT entries for the given program numbers.,
    1...64 Int values.

-shpat
    Displays the program association table..

-addcam
    Identifies programs to be processed by the CAM by specifying one or more program numbers.,
    1...32 Int values.

-delcam
    Deletes programs being processed by the CAM by specifying one or more program numbers.,
    1...32 Int values.

-shcam
    Displays list of program numbers being processed by the CAM..

-camwatchdog
    CAM watchdog interval in seconds.,
    1 Int value between 0 and 254.

-addvprog
    Forwards video programs with given identifier to the provided IP address and port.,
    3...64 String values

-delvprog
    Stops the forwarding of a video program with given identifier and destination specified by an IP address and port.,
    3...64 String values

-adddprog
    Configures processing of data in the given program.,
    1 Int value.

-deldprog
    Stops the processing of data in the given program.,
    1 Int value.

-shvprog
    Displays video programs being forwarded..

-shguide
    Displays received program guide..

-goldcode
    Modulator gold code in use for signal being received.,
    1 Int value between 0 and 262141.

-isi
    Controls whether Input Stream Identifier (ISI) filtering is done. Specify 'on' or 'off'.,
    1 String value

-setisi
    Specifies Input Stream Identifier (ISI) value to use for filtering.,
    1 Int value between 0 and 255.

-modcod
    MODCOD in use for received DVB-S2 signal.,
    1...2 String values

-updatefirmware
    Loads new firmware from given file into receiver.,
    1 String value

-csv1status
    Exports a CSV File containing status information. Specify Filename.,
    1 String value

-csv2status
    Exports a CSV File containing extended status information. Specify Filename.,
    1 String value

DESCRIPTION
The CMCS utility is a command-line tool that allows for quering and setting device status and configuration for the Novra S75, S200, and S300N receiver families. For windows users, please ensure the cygwin1.dll file is in the same working directory as the cmcs.exe executable or in the proper PATH environment variable.