Basic Installation Steps for new firmware on your S300N.  See GUI or cmcs manuals for full details


1. Take a backup of your current config
- save on GUI or cmcs

2.  Prepare your host computer with a second address to communicate with the new IP address of the
S300N after the firmware changes.  After the firmware change, the address of the S300N receiver will be 
192.168.0.1 and its password will be the default "Novra-S2".
Thus your host computer should be 192.168.0.x where x is not 1

2.  Load new firmware  (using GUI or cmcs)

3. Reload config from step 1

Enjoy the improved performence of your S300N
